Xiang Cheng

This book proposes promising mmWave solutions to promoting safe and reliable vehicular communications. The authors include topics such as channel estimation, multi-user transceiver design, and advanced index modulation. For channel estimation, unique channel properties and hybrid structures are first introduced, followed by the development of a doubly-sparse doubly-selective channel estimator. For multi-user transceiver design, the concept of hybrid block diagonalization (HBD) is first introduced, followed by a generic HBD-based transceiver design to maximize the system capacity. For advanced index modulation, the generalized beamspace modulation for uplink multi-user scenarios are first introduced, followed by the precoded beamspace modulation for the downlink. Finally, this book discusses open problems and future research directions to inspire further studies in the field of mmWave vehicular communications.

This book proposes promising mmWave solutions to promoting safe and reliable vehicular communications. The authors include topics such as channel estimation, multi-user transceiver design, and advanced index modulation. For channel estimation, unique channel properties and hybrid structures are first introduced, followed by the development of a doubly-sparse doubly-selective channel estimator. For multi-user transceiver design, the concept of hybrid block diagonalization (HBD) is first introduced, followed by a generic HBD-based transceiver design to maximize the system capacity. For advanced index modulation, the generalized beamspace modulation for uplink multi-user scenarios are first introduced, followed by the precoded beamspace modulation for the downlink. Finally, this book discusses open problems and future research directions to inspire further studies in the field of mmWave vehicular communications.

Thanks to their considerable advantages, index modulation and orthogonal frequency division multiplexing (OFDM) are considered to be promising candidates for future wireless communications. This book focuses on the index modulation techniques for OFDM communications systems, which allow information to be conveyed not only via constellation symbols, but also by the indices of various transmission entities in OFDM systems, such as signal constellations, spreading codes, and pilots. The book discusses representative transmitter and receiver designs, optimization and performance analysis of index modulation based on various transmission entities. It first introduces readers to constellation-based index modulation via a combinatorial approach, including the classical index modulation scheme and two embodiments of information-guided precoding for OFDM systems. It further discusses constellation-based index modulation via a permutational approach, including the basic, generalized, and diversity-enhancing forms. It then describes how the spreading code is used to design an index modulated spread spectrum for OFDM systems, and the extensions to multi-code and multi-user scenarios. In addition it explores information guided pilot insertion for OFDM systems, followed by applications to carrier phase tracking and channel estimation. Lastly, the book highlights a number of open problems and discusses future research directions in the general field of index modulation. Intended for professionals and researchers in the field of wireless communications, this book is also a valuable resource for advanced-level electrical engineering and computer science students.

Thanks to their considerable advantages, index modulation and orthogonal frequency division multiplexing (OFDM) are considered to be promising candidates for future wireless communications. This book focuses on the index modulation techniques for OFDM communications systems, which allow information to be conveyed not only via constellation symbols, but also by the indices of various transmission entities in OFDM systems, such as signal constellations, spreading codes, and pilots. The book discusses representative transmitter and receiver designs, optimization and performance analysis of index modulation based on various transmission entities. It first introduces readers to constellation-based index modulation via a combinatorial approach, including the classical index modulation scheme and two embodiments of information-guided precoding for OFDM systems. It further discusses constellation-based index modulation via a permutational approach, including the basic, generalized, and diversity-enhancing forms. It then describes how the spreading code is used to design an index modulated spread spectrum for OFDM systems, and the extensions to multi-code and multi-user scenarios. In addition it explores information guided pilot insertion for OFDM systems, followed by applications to carrier phase tracking and channel estimation. Lastly, the book highlights a number of open problems and discusses future research directions in the general field of index modulation. Intended for professionals and researchers in the field of wireless communications, this book is also a valuable resource for advanced-level electrical engineering and computer science students.

This book introduces the sources and historic collection campaigns of resource allocation in wireless communication systems. The unique characteristics of MIMO-OFDMA systems are thoroughly studied and summarized. Remarks on resource allocation and spectrum sharing are also presented, which demonstrate the great value of resource allocation techniques, but also introduce distinct challenges of resource allocation in MIMO-OFDMA systems. Novel resource allocation techniques for OFDMA Systems are surveyed from various applications (e.g., for unicast, or multicast with Guaranteed BER and Rate, subcarrier and power allocation with various detectors, low-complexity energyefficient resource allocation, etc.) in this book.Due to the high mobility and low latency requirements of 5G wireless communications, this book discusses how to deal with the imperfect CSI. It also discusses how to deal with e.g., throughput maximization, outage probabilities maximizationand guarantee, energy efficiency, physical-layer security issues with feedback channel capacity constraints, in order to characterize and understand the applications of practical scenes.This book will target professionals & researchers working in the fields of Wireless Communications and Networking, Resource Allocation and Transmissions. Advanced-level students in electrical engineering and computer science will also find this book useful as a secondary textbook.

This book introduces the sources and historic collection campaigns of resource allocation in wireless communication systems. The unique characteristics of MIMO-OFDMA systems are thoroughly studied and summarized. Remarks on resource allocation and spectrum sharing are also presented, which demonstrate the great value of resource allocation techniques, but also introduce distinct challenges of resource allocation in MIMO-OFDMA systems. Novel resource allocation techniques for OFDMA Systems are surveyed from various applications (e.g., for unicast, or multicast with Guaranteed BER and Rate, subcarrier and power allocation with various detectors, low-complexity energyefficient resource allocation, etc.) in this book.Due to the high mobility and low latency requirements of 5G wireless communications, this book discusses how to deal with the imperfect CSI. It also discusses how to deal with e.g., throughput maximization, outage probabilities maximizationand guarantee, energy efficiency, physical-layer security issues with feedback channel capacity constraints, in order to characterize and understand the applications of practical scenes.This book will target professionals & researchers working in the fields of Wireless Communications and Networking, Resource Allocation and Transmissions. Advanced-level students in electrical engineering and computer science will also find this book useful as a secondary textbook.

This book provides a comprehensive picture of mobile big data starting from data sources to mobile data driven applications. Mobile Big Data comprises two main components: an overview of mobile big data, and the case studies based on real-world data recently collected by one of the largest mobile network carriers in China. In the first component, four areas of mobile big data life cycle are surveyed: data source and collection, transmission, computing platform and applications. In the second component, two case studies are provided, based on the signaling data collected in the cellular core network in terms of subscriber privacy evaluation and demand forecasting for network management. These cases respectively give a vivid demonstration of what mobile big data looks like, and how it can be analyzed and mined to generate useful and meaningful information and knowledge. This book targets researchers, practitioners and professors relevant to this field. Advanced-level students studying computer science and electrical engineering will also be interested in this book as supplemental reading.

This book provides a comprehensive picture of mobile big data starting from data sources to mobile data driven applications. Mobile Big Data comprises two main components: an overview of mobile big data, and the case studies based on real-world data recently collected by one of the largest mobile network carriers in China. In the first component, four areas of mobile big data life cycle are surveyed: data source and collection, transmission, computing platform and applications. In the second component, two case studies are provided, based on the signaling data collected in the cellular core network in terms of subscriber privacy evaluation and demand forecasting for network management. These cases respectively give a vivid demonstration of what mobile big data looks like, and how it can be analyzed and mined to generate useful and meaningful information and knowledge. This book targets researchers, practitioners and professors relevant to this field. Advanced-level students studying computer science and electrical engineering will also be interested in this book as supplemental reading.

A comprehensive reference giving a thorough explanation of propagation mechanisms, channel characteristics results, measurement approaches and the modelling of channels Thoroughly covering channel characteristics and parameters, this book provides the knowledge needed to design various wireless systems, such as cellular communication systems, RFID and ad hoc wireless communication systems. It gives a detailed introduction to aspects of channels before presenting the novel estimation and modelling techniques which can be used to achieve accurate models. To systematically guide readers through the topic, the book is organised in three distinct parts. The first part covers the fundamentals of the characterization of propagation channels, including the conventional single-input single-output (SISO) propagation channel characterization as well as its extension to multiple-input multiple-output (MIMO) cases. Part two focuses on channel measurements and channel data post-processing. Wideband channel measurements are introduced, including the equipment, technology and advantages and disadvantages of different data acquisition schemes. The channel parameter estimation methods are then presented, which include conventional spectral-based estimation, the specular-path-model based high-resolution method, and the newly derived power spectrum estimation methods. Measurement results are used to compare the performance of the different estimation methods. The third part gives a complete introduction to different modelling approaches. Among them, both scattering theoretical channel modelling and measurement-based channel modelling approaches are detailed. This part also approaches how to utilize these two modelling approaches to investigate wireless channels for conventional cellular systems and some new emerging communication systems. This three-part approach means the book caters for the requirements of the audiences at different levels, including readers needing introductory knowledge, engineers who are looking for more advanced understanding, and expert researchers in wireless system design as a reference. Presents technical explanations, illustrated with examples of the theory in practiceDiscusses results applied to 4G communication systems and other emerging communication systems, such as relay, CoMP, and vehicle-to-vehicle rapid time-variant channelsCan be used as comprehensive tutorial for students or a complete reference for engineers in industryIncludes selected illustrations in colorProgram downloads available for readersCompanion website with program downloads for readers and presentation slides and solution manual for instructors Essential reading for Graduate students and researchers interested in the characteristics of propagation channel, or who work in areas related to physical layer architectures, air interfaces, navigation, and wireless sensing

This book presents and develops comprehensive knowledge of vehicular channel characteristics and proper vehicular channel models. The studied topics contain the propagation characteristics of vehicular communications, such as: a time-frequency non-stationary single-input single-output (SISO) vehicle-to-vehicle (V2V) non-geometry stochastic model (NGSM); a space-time non-stationary massive multiple-input multiple-output (MIMO) V2V regular-shaped geometry-based stochastic model (RS-GBSM); and a space-time non-stationary massive MIMO V2V irregular-shaped geometry-based stochastic model (IS-GBSM). Each is introduced, with characteristics then discussed in detail. Finally, this book discusses future research directions to inspire further investigation in the field of vehicular channels from three different perspectives.

This book focuses on the propagation characterization and channel modeling of Unmanned Aerial Vehicle (UAV) communications. Currently, there are no books that cover this specific topic. The authors fill in this void by elaborating accurate yet easy-to-use UAV channel models. The authors also present such topics as propagation characteristics of UAV communications, a time stationary regular-shaped geometry-based stochastic model (RS-GBSM) for UAV narrowband channels. It also introduces a time non-stationary RS-GBSM for UAV narrowband channels, a time non-stationary RS-GBSM for UAV wideband channels, a time-space non-stationary irregular-shaped geometry-based stochastic model (IS-GBSM) for UAV wideband channels and more. Finally, this book closes up with some promising directions, hoping to promote future research outcomes in the field of UAV channel modeling. As the UAV technology matures rapidly, UAV communications are shifting from military development to civilian and commercial sectors. The UAV communication is widely considered as a significant and indispensable component of wireless communications. It is well known that an accurate yet easy-to-use UAV channel model is the foundation of designing a proper UAV communication system and evaluating its performance. This book also provides valuable suggestions for the design of UAV communication systems by adequately presenting the UAV propagation characterization and channel modeling. This book is mainly written for researchers and professionals working in wireless communications. Advanced-level students majoring in computer science or electrical engineering may also find the content useful as a secondary textbook.

This book presents and develops comprehensive knowledge of vehicular channel characteristics and proper vehicular channel models. The studied topics contain the propagation characteristics of vehicular communications, such as: a time-frequency non-stationary single-input single-output (SISO) vehicle-to-vehicle (V2V) non-geometry stochastic model (NGSM); a space-time non-stationary massive multiple-input multiple-output (MIMO) V2V regular-shaped geometry-based stochastic model (RS-GBSM); and a space-time non-stationary massive MIMO V2V irregular-shaped geometry-based stochastic model (IS-GBSM). Each is introduced, with characteristics then discussed in detail. Finally, this book discusses future research directions to inspire further investigation in the field of vehicular channels from three different perspectives.

This book investigates and reviews recent advanced techniques and important applications in vehicular communications and networking (VCN) from a novel perspective of the combination and integration of VCN and connected vehicles, which provides a significant scientific and technical support for future 5G-based VCN.5G-Enabled Vehicular Communications and Networking introduces vehicular channel characteristics, reviews current channel modeling approaches, and then provides a new generic geometry-based stochastic modeling approach for vehicle-to-everything (V2X) communications. The investigation of vehicular channel measurements and modeling provides fundamental supports for the VCN system design. Then, this book investigates VCN-vehicle combination from PHY and MAC layers, respectively. As for the PHY layer, many advanced techniques that can be effectively applied in VCN to counter the PHY challenges are introduced, including novel ICI cancellation methods, index modulated OFDM, differential spatial modulation, and energy harvesting relaying. As for the MAC layer, distributed and centralized MAC designs are analyzed and compared in terms of feasibility and availability. Specifically, distributed congestion control, D2D-enabled vehicular communications, and centralized data dissemination scheduling are elaborated, which can significantly improve the network performance in vehicular networks. Finally, considering VCN-vehicle integration, this book introduces several hot-topic applications in vehicular networks, including electric vehicles, distributed data storage, unmanned aerial vehicles, and security and privacy, which indicates the significance and development value of VCN-vehicle integration in future vehicular networks and our daily life. The primary audience for this book includes professionals and researchers working in the field of vehicular communications, intelligent transportation systems (ITS), and Internet of vehicles (IoV). Advanced level students studying electrical engineering will also find this book useful as a secondary textbook for related courses.

This book presents a thorough examination of index modulation, an emerging 5G modulation technique. It includes representative transmitter and receiver design, optimization, and performance analysis of index modulation in various domains. First, the basic spatial modulation system for the spatial domain is introduced. Then, the development of a generalized pre-coding aided quadrature spatial modulation system as well as a virtual spatial modulation system are presented. For the space-time domain, a range of differential spatial modulation systems are examined, along with the pre-coding design. Both basic and enhanced index modulated OFDM systems for the frequency domain are discussed, focusing on the verification of their strong capabilities in inter-carrier interference mitigation. Finally, key open problems are highlighted and future research directions are considered.Designed for researchers and professionals, this book is essential for anyone workingin communications networking, 5G, and system design. Advanced-level students of engineering and computer science interested in efficiency techniques will also find the content valuable.

Following underwater acoustic channel modeling, this book investigates the relationship between coherence time and transmission distances. It considers the power allocation issues of two typical transmission scenarios, namely short-range transmission and medium-long range transmission.

This book presents a thorough examination of index modulation, an emerging 5G modulation technique. It includes representative transmitter and receiver design, optimization, and performance analysis of index modulation in various domains. First, the basic spatial modulation system for the spatial domain is introduced. Then, the development of a generalized pre-coding aided quadrature spatial modulation system as well as a virtual spatial modulation system are presented. For the space-time domain, a range of differential spatial modulation systems are examined, along with the pre-coding design. Both basic and enhanced index modulated OFDM systems for the frequency domain are discussed, focusing on the verification of their strong capabilities in inter-carrier interference mitigation. Finally, key open problems are highlighted and future research directions are considered.Designed for researchers and professionals, this book is essential for anyone workingin communications networking, 5G, and system design. Advanced-level students of engineering and computer science interested in efficiency techniques will also find the content valuable.

Following underwater acoustic channel modeling, this book investigates the relationship between coherence time and transmission distances. It considers the power allocation issues of two typical transmission scenarios, namely short-range transmission and medium-long range transmission. For the former scenario, an adaptive system is developed based on instantaneous channel state information. The primary focus is on cooperative dual-hop orthogonal frequency division multiplexing (OFDM).This book includes the decomposed fountain codes designed to enable reliable communications with higher energy efficiency. It covers the Doppler Effect, which improves packet transmission reliability for effective low-complexity mirror-mapping-based intercarrier interference cancellation schemes capable of suppressing the intercarrier interference power level. Designed for professionals and researchers in the field of underwater acoustic communications, this book is also suitable for advanced-level students in electrical engineering or computer science.